Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Brightlink BL-MOD-VW-6X20-4K
Summary of Contents for Brightlink BL-MOD-VW-6X20-4K
- Page 1 User Manual —————————————— 4K Modular Video Wall Processor 2018-8...
- Page 2 Important Safety Instructions ◆ Make sure that all devices you will be connecting up are properly grounded. ◆ Make sure that the power to all the devices you will be connecting up has been turned off. ◆ Do not place other objects on the cable. ◆...
-
Page 3: Table Of Contents
Contents Safety Instructions......................- 1 - About the Product......................- 2 - Overview........................- 2 - Feature description....................- 2 - Installation Instruction.......................- 4 - Unpacking the Machine.................... - 4 - Installation of the Machine..................- 4 - Machine Debugging....................- 4 - Installation of the Software..................- 4 - Software Installation Instruction................ -
Page 4: Safety Instructions
Safety Instructions 1. Power supply Please use the 220V AC power supply with single-phase three-wire and a grounding protection, and ensure that the entire engineering system is grounded. Do not use the power supply without grounding protection. The grounding pin of the power cable cannot be destroyed. 2. -
Page 5: About The Product
6) Do not block the ventilation holes of this equipment to avoid damage to the equipment. 7) Do not place the device near liquids. 8) Please properly place the power cord to prevent damage. 9) Unplug the power immediately and dispose of it by a professional in the event of any of the following conditions: a) when the plug power cord is damaged or worn out;... - Page 6 This system processor, unlike traditional design ideas, does not use a computer system, breaks the serial data chain, and uses a high-speed parallel processing mechanism to obtain a completely new application space. 3. Modular design of the whole machine This series of processors adopts the design idea of modular design, and the input and output terminals fully support hot swapping, which effectively reduces the failure rate of the equipment and greatly improves the stability of the equipment.
-
Page 7: Installation Instruction
8. High security performance The image processor has no operating system, the virus can not be infected; full parallel work, no system overall crash risk; system data has been solidified before leaving the factory, can not be changed, unexpected power failure will not cause data loss, the processor can withstand frequent switching. -
Page 8: Software Installation Instruction
One Ethernet Interface Min. screen size 17" TFT LCD CD-ROM drive 3.5 Software Installation Instruction The product control software is a green free installation version. Insert the CD into the CD-ROM drive, open the file on the CD, and then copy the package to the computer. The extracted file can be used. -
Page 9: Processor Software Operation Instruction
Ⅳ.Processor Software Operation Instruction The software can be divided into three main areas from the function, respectively, for the Control Panel area, toolbar area, window operation area, each functional area division of efforts to complete the multi-screen splicing processor of various functional operations. Control Window Toolbar... - Page 10 4.1.3Others Click this button to enter the configuration of the software 4.1.3.1Panel Under administrator privileges, add features from the Panel to『the Control Panel area』as needed 4.1.3.2 User Under administrator privileges, add features from the Panel to 『the Control Panel area』 as needed。 Users and passwords that can be added, modified, and removed from user permissions.
- Page 11 the login was logged. 4.1.3.3 Registered After you have been authorized, you can view the permissions and time of registration. 4.1.3.4 Language Settings Select the type of language you want, click the Settings button, restart the software to take effect. 4.2 Control Panel Area Control Panel has five lists in total, the default Display controller signal, window properties.
- Page 12 The resolution, frame rate, and detailed synchronization width of the current access signal can be viewed through the signal source properties。 4.2.1.2 Advanced Property of Signal Source This advanced property is currently only suitable for use in VGA signal sources. This property allows you to adjust the signal source.
- Page 13 Move your mouse over the window in the window's action area and click on the window you want to view. The window's title list, location, and cropped properties can be seen in the window properties list. If you need to make precise adjustments, you can fill in the required values and click the OK button.
-
Page 14: Window Operation Area
Under the administrator's authority, you can create different window layouts. You can switch between various layouts manually and quickly. Specific reference 『window layout operation』. 4.2.6 Scene management Under the administrator's authority, you can create different window layouts. You can switch between various layouts manually and quickly. - Page 15 and modified while the wall is being created. Specific reference to『create a display wall』. Activate window : By clicking the virtual window with the mouse, you can read out various properties of the window, and refer to the『window properties』. Hidden window : Right click on the virtual window and select the hidden window to hide the window on the display wall and make the virtual window translucent.
-
Page 16: Detailed Description Of Software Function Settings
Ⅴ.Detailed Description of Software Function Settings 5.1Equipment Management 5.1.1 Network Settings When using the device for the first time, you need to set the correct network address and control the computer connection. After the settings are saved, you can log in automatically after the later use. - Page 17 Step 4 : Enter the management software and select the controller button in the configuration of the toolbar. Step 5 : In the controller management page, if the controller IP list is blank, click the Add button to add it. Step 6 : Click the search button.
-
Page 18: Create A Display Wall
Step 7 ： if the network is set up correctly and the device is powered on, you can see that the online state is online. The specific situation is shown in the figure below. If you need to modify the IP address of the device, please set it under the guidance of a professional. Repeat step 1 if the device is still offline. - Page 19 For normal shipment of products, the display wall properties required by users have been set. If there are changes, you must set the following: Step 1 : Enter the toolbar, click the display wall button in the configuration, and enter. Step 2 : the figure shows the existing configuration.
-
Page 20: Create A Signal Source
Ascending configuration, descending configuration: convenient for customers to configure the channel. Apply configuration: when all output channels are configured, click apply configuration and the system will automatically issue and save. 5.2.3 Create more wall Step 1 : perform step 1 of 5.2.1 to create a wall for a single device. Click add to create a new wall. -
Page 21: Window Operation
5.4 window operation 5.4.1 Shortcut window operation Step 1 ：Select the desired signal from the list of sources or devices. Step 2 ：After holding down the CTRL key and clicking the mouse and dragging in the window management area, the window opening action is completed. Step 3 ：... - Page 22 5.4.2 Precise window operation Step 1 : Select the desired signal from the list of sources or devices. Step 2 : In the window management area, hold down the Shift key and click the mouse and drag. In the popup window, you can adjust various properties of the window. Click ok to complete the windowing action.
- Page 23 Step 3 : fill in the name of the layout, fine-tune the position of the window in the list, and then click the Save button. Step 4 : the saved window layout will be displayed in the layout list. In the same way, multiple layouts can be added.
- Page 24 Step 2 : In the Layout Management List, fill in the scene name, right-click, and select Add Layout. Step 3 : In the Layout Manager dialog box, you need the name of the first layout and click the Select button. Step 4 : Repeat Step 2 and Step 3, and select the layout that will be played in turn.
-
Page 25: Peripheral Equipment Control
Step 5 : Scenario execution. Select the execution button, and the pre-set scene will continue to rotate. If you want to quit halfway or finish playing. Close the window. 5.6 Peripheral Equipment Control 5.6.1 Display screen control According to the manufacturer's agreement, please contact our customer service. 5.6.2 Matrix control According to the manufacturer's agreement, please contact our customer service. -
Page 26: Frequently Asked Questions
Ⅵ Frequently Asked Questions 6.1 Unable to Access Device Through Central Management Software Phenomenon: Showing that the network is not working. 1.Possible Reason: The Internet is not working? Solution: Use computer to access the network to test whether the network can work properly. Firstly, remove cable failure, network failure caused by computer virus, firewall block, until the computer can ping each other. -
Page 27: Factors Affecting System Performance
Ⅶ Factors Affecting System Performance When you build your system, you must consider the performance of the whole system, the factors that affect your system, and how to set it up to achieve optimal performance. The following are some common factors that affect the image quality of the device when building the system: 1.
Need help?
Do you have a question about the BL-MOD-VW-6X20-4K and is the answer not in the manual?
Questions and answers