Download Print this page

Wagener Fairburn Installation, Operation & Maintenance Instructions Manual

Advertisement

Quick Links

W A G E N E R
Fairburn
Installation, Operation & Maintenance
INSTRUCTIONS
Designed & Handcrafted in New Zealand
Designed & Handcrafted in New Zealand

Advertisement

loading

Summary of Contents for Wagener Fairburn

  • Page 1 W A G E N E R Fairburn Installation, Operation & Maintenance INSTRUCTIONS Designed & Handcrafted in New Zealand Designed & Handcrafted in New Zealand...
  • Page 2 Stove Top Cooking Again you must establish a good fire and allow the Fairburn to heat up. Never cook food directly on the top Part 2: Operation & Maintenance Instructions hot plates. The Fairburn is not a BBQ. Always use pots, pans and appropriate cooking implements. When...
  • Page 3: Part 1: Installation Instructions

    Ensure that your Fairburn is cold and that there are no hot embers in the fire box. (Please keep these Instructions for future Reference) The outer panels of your Fairburn may be cleaned with a soft dry rag. The Fairburn is coated with “high WAGENER Fairburn Cooker temperature black paint”...
  • Page 4 Preliminary Installation Procedures for WAGENER Fairburn Cooker To get the full benefit from the Wagener Fairburn it is important that it is installed correctly, both for efficiency and safety sake. The following points should be noted: 1. The characteristics and purpose of the Wagener Fairburn will determine its position within the home.
  • Page 5: Installation Clearances

    NOT burn driftwood or treated timber as they will damage your Fairburn and flue and void your nty. E: The heat output level of the Fairburn is controlled not only by the air control but also by the type and y of fuel in the firebox.
  • Page 6 Wagener Stoves have over draw through a bend. The performance of the Wagener Fairburn depends more on the flue than on any other draw through a bend. The performance of the Wagener Fairburn depends more on the flue than on any other The Wagener Fairburn uses a 150mm diameter flue.
  • Page 7 150mm Free Standing Wood Fire Flue Kit Installation Instructions continued 1. Locate Wood Fire in its proposed position and mark a point on the ceiling that is directly above the centre of the Wood Fire’s Flue Flange. Check that the Wood Fire’s location allows the OUTER CASING to clear all structural roof timbers.
  • Page 8: Warnings And Cautions

    We recommend an annual safety check of flues, bricks, door seals, door catches, air controls and the like. When your Fairburn is not in use please ensure that the air control is in the closed position. The air control should always be in the fully open position before opening the fire box door for starting and refuelling.
  • Page 9 DO NOT burn driftwood, chipboards, painted, stained or treated timbers or glossy print material as they will all damage your Fairburn and flue and void your warranty. NOTE: The heat output of the Fairburn is controlled not only by the air control but also by the type and quality of fuel in the firebox.
  • Page 10 Stove Top Cooking Establish a good fire and allow the Fairburn to heat up. Never cook food directly on top of the top plates. Always use pots, pans and appropriate cooking implements. When bringing pots to the boil or requiring high heat use top plates directly over the firebox.
  • Page 11 Ash Removal Over a period of time ash will build up in your Fairburn ash pan requiring removal. Ash build up will depend upon the quality and quantity of fuel used. To empty ashes from the fire box, rake the grate with the poker to clear deposits above.
  • Page 12 Wagener Stoves “Lion” Ltd reserves the right to change specifications or design of its products without prior notice. WAGENER STOVES “LION” LTD 5 Allen Bell Drive, KAITAIA, NZ. Phone/Fax: 09 408 2469 www.wagenerstoves.co.nz 2017 2021...