Related Manuals for Emerson RP6289
Summary of Contents for Emerson RP6289
- Page 1 AM/FM RADIO/FLASHLIGHT BATTERY OPERATION and BACK-UP DYNAMO POWER SUPPLY OWNER’ S MANUAL RP6289 Visit our web site at www.emersonradio.com RP6289_030504.p65 5/3/2004, 11:02...
- Page 2 If you experience a power failure due to severe weather conditions, or any other reason, this unique Emerson model will always be ready to provide you with news, and a compact light source, until the power is restored.
-
Page 3: Important Notes
IMPORTANT NOTES FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. -
Page 4: Preparation For Use
PREPARATION FOR USE POWER SOURCE This Radio/Flashlight is designed to operated on two “AA” batteries, not included, or the included rechargeable NiMH battery pack which is located in the battery compartment. Using “AA” Batteries Important Notes: • Use only a well known brand of alkaline batteries for longest life and best performance. - Page 5 2.) Place the “AA” batteries in the compartment, following the polarity symbols (+ and - ) marked inside. AA / UM3 / R6 AA / UM3 / R6 3.) Replace the cover. 4.) Set DYNAMO/BATTERY selector switch to BATT. Notes: •...
- Page 6 Using the Rechargable NiMH battery pack Your radio has a built-in power generator which can charge the internal rechargeable battery pack and let you play your radio without the “AA” batteries. When you rotate the crank for as little as one and half minutes, the generator recharges the 2.4V battery pack which powers the radio for about 30 minutes.
- Page 7 Replacing the Rechargable NiMH battery pack If turning the crank at about 2 turns per second for about 1 minute does not power the radio for at least 15 minutes, replace the 2.4V rechargeable battery pack. 1.) Remove the battery compartment cover. 2.) Unplug the rechargeable battery pack connector and lift the pack out of the compartment.
-
Page 8: Location Of Controls And Indicators
LOCATION OF CONTROLS AND INDICATORS O P E N 1.) DYNAMO/BATT Selector Switch. 2.) Speaker. 3.) EARPHONE Jack. 4.) Flash Light. 5.) LIGHT HI/OFF/LO Selector Switch. 6.) Tuning Dial. 7.) TUNING Control. RP6289_030504.p65 O P E N 8.) VOLUME Control. 9.) Band (FM/AM) Switch. -
Page 9: Playing The Radio
OPERATING INSTRUCTIONS PLAYING THE RADIO 1.) If you have installed “AA” batteries, set the DYNAMO/BATT selector switch to BATT position. To power the radio using the rechargeable pack or the generator, set the DYNAMO/BATT selector switch to DYNAMO position. 2.) Rotate the VOLUME control clockwise ( ) to turn the radio “On”. 3.) Set FM/AM band selector to the desired band. -
Page 10: Limited Warranty
Depot Repair Facility, or replace the product in our discretion. For repair or replacement, pack your unit in a padded box, enclose your check or money order payable to Emerson Radio Corp. in the amount of $5.00 (not required by California residents) to cover shipping and handling costs, and enclose a copy of your proof of purchase. - Page 11 EMERSON PART NO. 16-2928 403-01 PRINTED IN CHINA RP6289_030504.p65 5/3/2004, 11:02...