Passwords; Store And Retrieve Settings; Figure 22: Configuration - Username/Password Modification Screen - ABB AWIN GW120 User Manual

Hide thumbs Also See for AWIN GW120:

Table of Contents

PA S S WO RD S

6.14

Passwords

There are administrator password and monitor password. The administrator can make

changes to the configuration, whereas a monitor can only view information.

To change or set passwords, click Configuration > Username/Passwords in the left naviga-

tion column. Passwords must be 10 characters long.

6.15

The Configuration > Store Retrieve Settings screen provides the following options:

– Factory Default – it can load the factory default parameters. To do so, select Set Factory

Defaults.

– Upload Configuration to device – it can upload the configuration to the gateway from a

previously saved file. User must "Choose" the Config file, add "Passphrase", and click

"Send Configuration to Device".

– Send Configuration to File – it can export gateway's existing configuration to a PC's hard

drive. A "Passphrase" is required.

– Export As-Built Configuration - it can export gateway's existing configuration in text for-

mat. It will only export configuration of connected devices.

A 10-character passphrase is required to protect/validate the file before it can be

saved or retrieved from a PC. It prevents unauthorized users from applying the sys-

tem configuration file to an unauthorized access point to gain access to the net-

work. Always record this passphrase when saving a configuration file. It will need

to be re-entered each time that specific configuration file is uploaded to the AWIN

GW120.

In this case, IP address is not restored to factory default. It remains as-is. How-

ever, if you want to also reset IP address, you can use hard reset option.

CO N FI G U R A T IO N

4J NO 0 0030 8 A

Table of Contents