Names Of Parts - Heinner VGEN002 Instructions Manual

1. NAMES OF PARTS

(1) Fuel tank
(2) Fuel tank cap
(3) Fuel gauge
(4) Choke handle
(5) Air cleaner
(6) Starting handle
(7) Fuel valve
2．CHECKS BEFORE OPERATING
(1) Check the engine oil level
Notice: Stop the generator in a smooth place, then check the generator. Engine oil is
a major factor affecting engine performance and life.
Use the 4-stroke oil, SAE10W-40 is recommended for general,
all-temperature use. Other viscosities shown in the chart may be
used when the average temperature in your area is within the
indicated range.
① Uncover the oil mouth then clean the engine oil ruler
with clean cloth.
② Plug the engine oil ruler into the oil mouth and don't
turn it. If the oil level is below the lower limit of the
engine oil ruler you should add some engine oil.
③ Add the engine oil to the upper limit of ruler.
④ Fix the engine oil plug ruler properly.
(8) Engine switch
(9) Oil filler cap
(10) Voltage meter
(11) AC circuit breaker
(12) AC socket
(13) Ground connection terminal
GASOLINE GENERATOR
OIL FILLER HOLE OIL FILLER CAP
DIP STICK
UPPER LEVEL
LOWER LEVEL
2