Advertisement
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Trigger is in the off-position and unplug battery from
tool before performing any procedure in this section.
Battery Charging
Charge battery after unpacking and before using this tool. Follow
instructions included with battery charger (sold separately).
Setting the Gear
1. Select an operating speed depending
on the material being mixed.
a. Use Gear 1 for heavy materials
and when beginning to mix.
b. Use Gear 2 for lighter materials, and as the
material becomes smoother after partial mixing.
Gear Switch
Adjusting the Speed
Turn the Speed Dial on the Handle from 1 (lowest) to Max (highest).
Work Area Set Up
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
Page 10
For technical questions, please call 1-888-866-5797.
2. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Item 58152
Advertisement
