Related Manuals for Perfect Display P25T
Summary of Contents for Perfect Display P25T
- Page 1 P25T Instruction Manual Please read this manual thoroughiy before use,and keep it handy for future reference...
-
Page 2: General Information
GENERAL INFORMATION Dear Customer, Thank you for having purchased this product. This document describes how to install and use the LCD colour monitor. Read this manual which contains information for correct, safe use carefully. Keep this manual at hand so that you can refer to it when needed. PRODUCT DESCRIPTION AND TYPE OF USE The LCD color monitor presents a very rugged structure. -
Page 3: Installation Precautions
WARNINGS POWER Only use the power unit provided to power the device. Check mains rating before plugging the power unit in. Do not pull the cable to unplug the device. SAFETY PRECAUTIONS Keep the device away from rain and humidity to prevent risk of fire and electrocution. Do not introduce material (solid or liquid) inside. - Page 4 MATERIALE INCLUSO...
-
Page 5: Wall Mounting
CONNESSIONI DISPONIBILI SUL MONITOR DC 12V HDMI 1 AUDIO OUT Power HDMI 1 (HDMI2.0, 240Hz, FreeSync) DP1(DisplayPort1.2, 280Hz, FreeSync & G-Sync) DP2(DisplayPort1.2, 280Hz, FreeSync & G-Sync) AUDIO OUT WALL MOUNTING The monitor is provided with moun ng holes for a VESA approved wall moun ng bracket (not supplied) The VESA moun ng pa ern is: 100x100mm and the size of the screws is 4 x M6 x 10 (not supplied) Do not use screws longer than specified or damage will occur to the internal components. -
Page 6: Menu Options
Shortcut Key Guide ◄ ► Activate the Signal Input Selection menu.Use to navigate and M to select the source. Activeate the Line of Sight feature. Further press to cycle between the colors or turn off. Activeate the ECO Mode feature.Further press to cycle through the presets. INITIAL SETUP Connect the monitor to a power outlet. -
Page 7: Input Source
OSD MENU A. Input Source 1920x1080@280Hz Settings HDMI Settings 1920x1080@280Hz Switch the signal input to DP1,DP2,HDMI,or have the monitor Auto Select the source. B . Brightness/Contrast 1920x1080@280Hz Settings Settings 1920x1080@280Hz Brightness: Change the display brightness value from 0 to 100. Contrast: Adjust the display contrast value from 0 to 100. -
Page 8: Color Settings
C . Color Settings 1920x1080@280Hz Standard Settings Warm Settings Low Blue Light 1920x1080@280Hz Gamma: Change the display Gamma value to:2.0,2.2,2.4. ECO Mode: Change the pliture mode to:Standad, Photo,Game,FPS,Movie,RTS. Color Temperature: Change the color temperature to:Normal,Warm,Cool,User. Hue: Change the display Hue value from 0 to 100. Saturation: Change the display Saturation value from 0 to 100. - Page 9 E . Display 1920x1080@280Hz Wide Settings Settings 1920x1080@280Hz Aspect Ratio: Change the image aspect ratio to Full Screen,Auto,4:3,1:1 or Wide Screen. F . Audio 1920x1080@280Hz Settings Settings 1920x1080@280Hz Mute:Turm On or Off to mute the audio source. Volume: Change the audio source volume from 0 to 100.
- Page 10 G . OSD 1920x1080@280Hz Settings Settings Normal 1920x1080@280Hz Language: Change the OSD Menu display language. OSD H Position: Change the horizontal position of the OSD Menu. OSD V Position: Change the vertical position of the OSD Menu. OSD Transparency: Change the transparency value of the OSD Menu from 0 to 100. OSD Timer: Change how long the OSD Menu is on before it automatically exits.
-
Page 11: Specification
SPECIFICATION Model P25T Screen Size 24.5” Aspect Ra�o 16:9 Backlight Brightness 400cd/m² Panel Type 1920x1080 Resolu�on Refresh Rate 280Hz Response Time 0.5ms Viewing Angle 170º/160º (CR>10) Contrast Ra�o 1000:1 VESA Moun�ng 100x100mm Colours 16.7M(8bit) AMD FreeSync Support G-Sync Support Support...