Advertisement
INSTALLATION INSTRUCTION
Part# PW003534
RUNNING BOARD FOR RANGE ROVER
ASSEMBLY PROCEDURE:
Step1: Check all the contents are available in accordance with the above list.
Step2: Remove the factory parts, and install mount brackets to the chassis as shown in fig# 1.
Step3: Loosen the both ends bolts of the running board, install the hardware ○
in flute, and then install the hardware ○
12
16
in running board.
Step4: Install running board to the mount brackets as shown in fig# 1.
Step5: Test and make sure that the running board is steadily fixed.
Page 2 of 2
NO. SMEN-H190302-WINBO(1)A1
Advertisement
