Spectra Precision Epoch 10 L1 Quick Reference Card

2 Secure by turning the two screws down to point at the lock
symbol on both sides of the data collector accessory cap base.
Step 6 – Attach the Antenna Cable
1 Attach the antenna cable to the
connector at the top of the GPS
receiver.
2 Attach the antenna cable to the
antenna.
The Epoch 10 L1 GPS system is now
ready to use.
Step 7 – Example: Measuring the Antenna
Height on a Tripod
• Measure up to the Top of Notch on the antenna using the HI
tape. This gives you the antenna height.
„ 2005, Spectra Precision. All rights reserved. CF-Cap, PowerBoot, and Recon are either trademarks or registered
trademarks of Tripod Data Systems, Inc. All other trademarks are the property of their respective owners.
P/N 57226-90. Revision A.
Spectra Precision, 7401 Church Ranch Blvd. Westminster, CO 80021. USA. Tel: +1-303-323-4100 888-477-7516
(Toll Free in U.S.A ).
™
Epoch 10 L1 GPS System
Quick Reference Card
Step 1 – Check the Contents of the Epoch 10 L1
GPS System Package
Check that your product packaging contains the following items:
™
• Epoch L1 10 GPS receiver
• Receiver carry pouch
• System field case
• HI tape
® ®
• Spectra Precision Recon data collector accessory cap base
• Antenna cable
Other items may be included depending on the configuration of the
system.