Spectra Precision EPOCH 25 Quick Reference Card
  1. Manuals
  2. Brands
  3. Spectra Precision Manuals
  4. GPS
  5. EPOCH 25
  6. Quick reference card
Spectra Precision EPOCH 25 Quick Reference Card

Spectra Precision EPOCH 25 Quick Reference Card

L1/l2 gps system
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Step 1 – Charge the internal rover
battery
1
Attach the DE-9 connector of the power supply to
Port 1 or Port 2 on the bottom of the Spectra
Precision
2
Plug the AC adaptor into an electrical supply.
EPOCH 25 rover receiver
The internal rover battery charges completely in
approximately 4 hours.
Quick Reference Card
®
™
EPOCH
AC adaptor
L1/L2 GPS System
25 rover receiver.
DE-9 connector
™
EPOCH
25

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EPOCH 25 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Spectra Precision EPOCH 25

Summary of Contents for Spectra Precision EPOCH 25

  • Page 1 Port 1 or Port 2 on the bottom of the Spectra ® ™ Precision EPOCH 25 rover receiver. Plug the AC adaptor into an electrical supply. EPOCH 25 rover receiver DE-9 connector AC adaptor The internal rover battery charges completely in approximately 4 hours.
  • Page 2 Step 2 – Charge the PowerBoot Module battery pack Take the data collector out of its packaging. ™ Slide the PowerBoot Module battery pack into the opening on the back of the data collector. (The battery pack is detached from the data collector for shipping.) Using a stylus or a screwdriver, turn each of the two camlock...
  • Page 3 Step 3 – Set up the EPOCH 25 base receiver Connect the GPS antenna cable to the EPOCH L1/L2 GPS antenna and to the base receiver. Connect the antenna cable to the EPOCH 25 receiver. Install the antenna, receiver and extension pole onto the tribrach.
  • Page 4 Step 4 - Set up the EPOCH 25 rover receiver Attach the EPOCH L1/L2 GPS antenna to the GPS receiver and connect the antenna cable between them. Thread the GPS receiver onto the range pole. Attach the data collector bracket to the pole.
  • Page 5 Step 5 – Measure the antenna height • For the base receiver: Use the HI tape to measure up to the Top of Notch on the antenna or to the bottom of the antenna mount. Top of Notch Bottom of mount •...
  • Page 6 © 2005–2006, Spectra Precision. All rights reserved. CF-Cap, PowerBoot Module, and Recon are either trademarks or registered trademarks of Tripod Data Systems, Inc. All other trademarks are the property of their respective owners. Version 2.31, revision B. Spectra Precision, 10355 Westmoor Drive, Suite #100, Westminster, CO 80021, USA.

Table of Contents