Advertisement
Quick Links
MR RESISTOR
230Vac
RECEIVER WITH DIMMER FUNCTION AND 0/10V - 1/10V OUTPUT. Push-
(* 110Vac)
button input for manual controls.
Product code
L
IN
N
N
OUT
L
EN - Power supply
< 0,5 s
= ON/OFF
Mounting
L
IN
N
OUT
N
L
TVDMMxxxG10Sx
PRODUCT:
TVDMM868G10S
TVDMM916G10S
* TVDMM916G10SZ
P3
P2
P1
1
2
3
4
5
6
> 0,5 s
1
165 mm
2
3
4
5
RELAY
6
Fixing holes
N
BALLAST / TRANSFORMER
L
1
(868.3Mhz)
(916Mhz)
(916Mhz, 110Vac)
Led 1
Aerial
Led 2
Led 3
Led 4
It's possible to connect in parallel more than one push-button.
= DIMMER
ꜛ ꜜ
47 mm
0/10V - 1/10V
0/10V - 1/10V
Output type selection
1/10V
0/10V
10
9
0-1 / 10V
8
OUT
7
Push-button input for manual controls.
10
9
8
7
T542.02
DOC.:
0-1 / 10V
35 mm
OUT
28/09/15
DATE:
Advertisement
Related Manuals for MR. RESISTOR TVDMM868G10S
Summary of Contents for MR. RESISTOR TVDMM868G10S
- Page 1 MR RESISTOR 230Vac RECEIVER WITH DIMMER FUNCTION AND 0/10V - 1/10V OUTPUT. Push- (* 110Vac) button input for manual controls. TVDMM868G10S (868.3Mhz) Product code TVDMM916G10S (916Mhz) * TVDMM916G10SZ Output type selection (916Mhz, 110Vac) Led 1 Aerial 1/10V Led 2 0/10V...
- Page 2 Wirings Standard connection 0-1 / 10V Power supply Led 1 1/10V Led 2 0/10V Led 3 Led 4 0/10V - 1/10V BALLAST / TRANSFORMER ≤ 30mA 0-1 / 10V 0/10V - 1/10V BALLAST / TRANSFORMER Connection through integrated relay Power supply 0-1 / 10V RELAY 0/10V - 1/10V...
- Page 3 P1+P3 Activation/deactivation of the memory of the last light intensity value LED4 ON Activation last value Press the buttons P1 and P3 at the same time. LED4 OFF Deactivation 100% Wireless command devices 100% 100% DIM + DIM - Min. DIM + Min.
- Page 4 Radio codes memorization TYPE OF MEMORIZATION continuous sound (see description p.3) keep it pressed 7 channels 1 button: < 1s. > 1s. ON/OFF DIMMER ꜛ ꜜ Press the button of the transmitter intermittent sound relative to the code to memorize. 1 button with function ON 1 button with function OFF Green Mouse...
- Page 5 Radio codes deletion TYPE OF DELETION keep it pressed intermittent sound Single radio code Press the button of the transmitter relative to the code to delete. continuous sound All the radio codes (10s.) Modification of the preset light values of a 7/42 channel transmitter If any transmitter with modified light values is used in the remote memorization (3.1), the added transmitter will have the same modified values.
- Page 6 Remote memorization of further radio codes continuous sound intermittent sound memorized continuous sound memorized P3 button is located inside the transmitter. The added radio code will have the same functions of the code used for the memorization. This < 5 s. 1 s.
- Page 7 SCENES programming Example address address address address 100% 100% OFF 100% scene scene scene scene 7/42 c. Setting the address of the receiver (1..20) P1+P2 1..20 LED4 Tens address . . . continuous sound LED2 ON LED3 Units Press the buttons P1 and P2 at the same time. The flashing of LED3 and LED4 shows the address.
- Page 8 Modification of the preset light values of a 7/42 channel transmitter memorized in more than one receiver RECEIVER ..5 s) continuous sound address Press the button CH1, CH2, CH3 or CH4 and keep it pressed 5 s. Select the receiver with CH5 or CH6.
- Page 9 SAFETY INFORMATION WARNING: READ CAREFULLY THIS INSTRUCTIONS BEFORE INSTALLING AND COMMISSIONING THE PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE Do not operate in the high voltage area of the electronic REFERENCE. board, when it is supplied. Use the product only in PRODUCT INSTALLATION combination with devices which can guarantee a safe The product at issue must be installed, commissioned...
-
Page 10: Technical Specifications
The connection cables must have a section suitable to the maximum load applied to the output, and to the additional devices connected to the input. IP20 Protection rating -20°C / +50°C Operating temperature range 868.3 MHz (TVDMM868G10S) Reception frequency 916 MHz (TVDMM916G10Sx) Radio memory capability (transmitters)
Need help?
Do you have a question about the TVDMM868G10S and is the answer not in the manual?
Questions and answers