MR. RESISTOR Wiser TVRGBWD868ST25 Manual

Radio receiver rgb controlling led strip common anode

Advertisement

Quick Links

RADIO RECEIVER RGB CONTROLLING LED STRIP COMMON ANODE
Product code:
TVRGBWD868ST25 4 output, 2.5A Master receiver
12-24Vdc power supply IN
12-24Vdc
power supply OUT
T2
T3

1 - Memorization of 7-channel transmitters with On/Off/Dimmer Colour function

P2
1 time
and hold down
1- Press the push button P2
once and hold it down, the
buzzer will make a beep and
then sound continuously.
CH1
CH2
CH3
CH4
CH5
CH6
CH7
P3
P2
P1
1
2
3
4
6
7
8
2- During the sound press one push
button, of the 7-channel transmitter which
has to be memorised, the memorization is
indicated by the intermittently sound of the
buzzer.
All the push-buttons of the transmitter are
automatically memorized.
Colour 1
Colour 2
Colour 3
Colour 4
Dim +
Dim -
Off
Led 1
Led 2
Led 3
Led 4
Ch1
Ch2
OR
Ch5
T452.02
1
+
Common
-
C1
-
C2
-
C3
-
C4
Attention:
respect the
leds polarity
Ch3
1
3
5
7
2
4
Function available only
6
8
Ch4
for 7 or 42 channels
Ch6
transmitter
Ch7
01/08/12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wiser TVRGBWD868ST25 and is the answer not in the manual?

Questions and answers

Summary of Contents for MR. RESISTOR Wiser TVRGBWD868ST25

  • Page 1 RADIO RECEIVER RGB CONTROLLING LED STRIP COMMON ANODE Product code: TVRGBWD868ST25 4 output, 2.5A Master receiver Led 1 Led 2 12-24Vdc power supply IN Led 3 Led 4 Common 12-24Vdc power supply OUT Attention: respect the leds polarity 1 - Memorization of 7-channel transmitters with On/Off/Dimmer Colour function Function available only for 7 or 42 channels transmitter...
  • Page 2 1.1 - How to change the pre-programmed colours in the 4 push buttons on the transmitter press the button to change press push button OFF for 10s 1- Press and hold down the push 2- Press and hold don push button OFF for 10s. button of the colour you desire to The light turns off and on again after 10 seconds change.
  • Page 3 Memorization of one transmitter push-button with ON function The push-button memorised with On function turns on the colour memorized in the “Colour 1“ push-button. Function available for all type of transmitters 3 times and hold down 1- Press the push button P2 2- During the sound press the push-button three times and hold it down, which has to be memorised with ON...
  • Page 4 6 - To copy a function of transmitter push-button to a new transmitter Function available for all type of transmitters 1- Press the button P3 located 2- Within 5 seconds 3- During the sound press inside the already memorized press a push-button of the push-button of the transmitter.
  • Page 5 8 - Memory activation/ deactivation of the last value of light intensity 1- Push the push button P1+P3 at the same time. - the light will flash 2 times and led 4 turn on if the function will be activated; - the light will flash 3 times and led 4 turn off if the function will be deactivated.

Table of Contents