Eiki LC-SX3 Owner's Instruction Manual page 18

CONNECTING THE PROJECTOR
CONNECTING AN IBM-COMPATIBLE LAPTOP COMPUTER
NOTE: This connection need optionally sold Graphic Accelerator PC card.
For this information, contact to your authorized dealer.
COMPUTER
SERIAL PORT PS/2 PORT
INPUT INPUT
MOUSE CABLE FOR
SERIAL PORT
(PROVIDED)
SERIAL PORT CABLE
(NOT PROVIDED)
R
AUDIO
INPUT
Amp.
NOTE: When connecting the cable, the power cords of both the projector and the external equipment should be
disconnected from AC outlet. Turn the projector and peripheral equipment on before the computer is switched on.
18
(DIGITAL INPUT CONNECTION)
Before using with digital connection, install (Plug in) Graphic
Accelerator PC card into card bus slot of the computer and set up
the computer following instructions in the Graphic Accelerator PC
card package.
INSTALL (PLUG)
INTO PC CARD
BUS SLOT
COMPUTER
AUDIO OUTPUT
COMPUTER
AUDIO INPUT 1
MOUSE CABLE FOR
PS/2 PORT
(PROVIDED)
CONTROL PORT
OUTPUT 1
AUDIO CABLE
(NOT PROVIDED)
SPEAKER
OUT
L
L
R
GRAPHIC
ACCELERATOR
PC CARD
ANALOG
OUTPUT
DIGITAL
OUTPUT
R
AUDIO CABLE
(NOT PROVIDED)
L
R L
USB 1 CONTROL PORT 1 AUDIO 1
R L
(MONO)
USB 2 CONTROL PORT 2 AUDIO 2
R L (MONO)
AUDIO OUT
R/C JACK SERIAL PORT
R L
SERIAL
PORT
OUTPUT
Speaker (L)
DIGITAL FLAT
PANEL CABLE
(PROVIDED)
COMPUTER
ANALOG
DIGITAL
INPUT 1
(DIGITAL)
R G B H V
ANALOG RGB
COMPUTER
AUDIO OUTPUT
Speaker (R)