Table of Contents
Advertisement
CONNECTING PROJECTOR
This projector has input and output terminals on its side for connecting computers and video equipment. Refer to figures on
pages 11 to 13 and connect properly.
USB CONNECTOR (Series B)
When controlling the computer
with Remote Control Unit of this
projector, connect USB port of
your personal computer to this
connector. (Refer to P12.)
AUDIO IN
AUDIO OUT
COMPUTER AUDIO
INPUT JACK
Connect the audio output
(stereo) from computer to
this jack. (Refer to P12.)
TERMINALS OF PROJECTOR
RESET BUTTON
This projector uses a micro
processor to control this unit,
and occasionally, this micro
processor may malfunction
and need to be reset. This
can be done by pressing
RESET button with a pen,
which will shut down and
restart the unit. Do not use
RESET function excessively.
VIDEO
Y – Pb / Cb – Pr / Cr
RESET
USB
CONTROL PORT
COMPUTER
AV
COMPUTER IN
AUDIO OUTPUT JACK
Connect an external
audio amplifier to this
jack.
(Refer to P12, 13.)
VIDEO INPUT JACKS
Connect the composite video
output from video equipment
to VIDEO/Y jack or connect
the component video outputs
to VIDEO/Y, Pb/Cb and
Pr/Cr jacks. (Refer to P13.)
S–VIDEO
AUDIO INPUT JACK
Connect the audio output
from video equipment to
this jack.
(Refer to P13.)
S-VIDEO INPUT JACK
Connect the S-VIDEO
output from video
equipment to this
jack. (Refer to P13.)
CONTROL PORT CONNECTOR
When controlling the computer
with Remote Control Unit of
this projector, connect the
mouse port of your personal
computer to this connector.
(Refer to P12.)
COMPUTER INPUT
TERMINAL (ANALOG)
Connect the computer
output to this jack.
(Refer to P12.)
11
Advertisement
Table of Contents
