Leadtek PCoIP Hardware Installation page 2

Client: Zero Client
Connect a USB keyboard and mouse to the zero client
1.
Connect one end of the ethernet cable to the zero client, and the other end to the switch / router
2.
Connect the screen cable to the zero client
3.
Connect the power supply to the zero client and plug in the power
4.
Press the power button on the zero client to start it.
5.
Connection indicator
Steady green light indicates
connected
Power button
Steady green light
indicates that the zero
client is on
(For more descriptions on LED indicators, please refer to the user manual included with the product)
USB port: Connect keyboard /
mouse
Ethernet port: connect switch
/ router
DVI connector: Connect
monitor