Edimax EW-7206APG User Manual page 6

Antenna Connector
This round connection is standard Reverse SMA connector where any
antennas with Reverse SMA connector can connect to the Access Point.
DC Adapter Port
Insert the power jack of the power adapter into this port.
LAN Port
The Access Point's LAN port is where you connect to your LAN's network
devices.
Reset
The Reset button allows you to do one of two things.
1) If problems occur with your Access Point, press the reset button with
a pencil tip (for less than 4 seconds) and the Access Point will re-
boot itself, keeping your original configurations.
2) If problems persist or you experience extreme problems or you
forgot your password, press the reset button for longer than 4
seconds and the Access Point will reset itself to the factory default
settings (warning: your original configurations will be replaced with
the factory default settings).
4
Introduction