Page 1
FS BOX ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| USER’S MANUAL ORIGINAL USER’S MANUAL Version 1.5 17/06/19...
Page 2
FS Box User’s Manual Version 1.5 | 17/06/19 Page 1 Contents General description Master Slave Power Technical specifications...
Page 3
A 'Slave' obtains its power and sound effects from the Master. The Slave is connected to the Master or to another Slave via a multi-core cable. The FS Box works on mains voltage as well as on the built-in rechargeable battery. If the mains voltage is interrupted during use, then the FS Box automatically switches over to the battery.
Page 4
When you record a new sound, the previous one will automatically be overwritten.. Slave An FS Box Slave obtains its power and sound signal from the Master. To that end, a Slave is connected to a Master or to another Slave connected to the Master via a special cable.
Page 5
Mains power The FS Box can work on mains power (230 volts) or on the built-in battery. If it is connected to mains power and the mains power switch is turned on, then the '230V' signal lamp will light up. The FS Box will then operate on mains power, and the battery will also be charged.
Page 6
Choice of 2 patterns: rotating (flashing) or arbitrary Data input: Entrance for remote control Serial data protocol developed specifically for the FS Box Dimensions and weights: Dimensions (Master and Slave) (h x b x d): 22.5 x 33.5 x 26 cm Weight of Master (incl.
Need help?
Do you have a question about the FS Box and is the answer not in the manual?
Questions and answers