Trademarks All names and products mentioned below are registered trademarks of their respective companies. Introduction Congratulations on your purchase of the VIA USB2.0 hi-speed host add on card, it provides up to 480Mbps bandwidth that performs 40 times faster than USB1.1 of 12Mbps with USB2.0 devices.
Driver Installation Windows 98 & 2000 Installation 1. Insert the supplied “Setup program CD” and execute the setup program by double clicking on the “SETUP.exe” file. 2. Click “Next”. Revision 2.5.8 - 3 - 2004/5/14...
Page 5
3. Select “Install USB 2.0 Driver” then Click “Next”. 4. Click “Finish” to install. This will restart your system. Please remember to save your files before you click the “Finish” button. - 4 - Revision 2.5.8 2004/5/14...
Page 6
Verify the PCI card has properly installed To confirm that the USB 2.0 Hi-speed PCI add on card has been correctly installed, check your Device Manager on the Windows system after restart. You should see an entry titled Universal Serial Bus “...
Windows ME & XP SP1 Installation Insert the supplied “Setup program CD” and execute the setup program by double clicking on the “SETUP.exe” file. Press “Next” Revision 2.5.8 - 6 - 2004/5/14...
Page 8
Select “Install USB 2.0 Driver” and click “Next”. Click “Yes” to continue, the system will restart when the driver has installed completely. Note: Due to legal issue, Microsoft EHCI drivers for Windows XP are not included inside this package. If the following window appears, please update your system to Windows XP SP1 then run the setup program again.
Page 9
Verify the PCI card has properly installed To confirm that the USB 2.0 Hi-speed PCI add on card has been correctly installed, check your Device Manager on the Windows system after restart. You should see an entry titled Universal Serial Bus “...
Uninstall Driver 1. Insert the “Setup program CD” and execute the setup program by double clicking on the “SETUP.exe” file. 2. Press “Next” to continue. - 9 - Revision 2.5.8 2004/5/14...
Page 11
All the driver installation steps may be a little different from this guide when you using a new upgrade version O.S., in this situation please follow the Windows prompt step to complete the installation procedure. Revision 2.5.8 - 10 - P/No: DX-UC104 2004/5/14...