Table of Contents
Advertisement
8 General information about radio operation
Radio transmission is performed on a non-exclusive RF channel, which
means that there is a possibility of interference occurring. Interference
can also be caused by switching operations, electrical motors or defective
electrical devices.
The range of transmission within buildings can differ greatly from that
available in the open air. Besides the transmitting power and the reception
characteristics of the receiver, environmental factors such as humidity in
the vicinity have an important role to play, as do on-site structural/screening
conditions.
Declaration of Conformity
Warmup hereby declares that the Warmup konekt Wireless
radio equipment is compliant with RED Directive 2014/53/EU
and Radio Equipment Regulations 2017. Please scan the QR
Code for the Declaration of Conformity.
Instructions for Disposal
Do not dispose of the device(s) with regular domestic waste!
Electronic equipment must be disposed of at local collection
points for waste electronic equipment in compliance with the
Waste Electrical and Electronic Equipment Directive.
9 Technical Specifications
Warmup konekt Wireless Smart Hub
Product Code
Operating Voltage
Supply Voltage
Current Consumption
Power Consumption, Plug-in
Mains Adapter
Standby Power Consumption
IP Rating
Ambient Temperature
Dimensions (W x H x D)
Weight
Radio Frequency Band
Maximum Radiated Power
Receiver Category
Type Open Area RF Range
Duty Cycle
Network
KW-UKHUB
100 - 240 V AC / 50 Hz
500 mA max.
2.5 W max.
5 to 35 °C
118 x 104 x 26 mm
868.0-868.6 MHz, 869.4-869.65 MHz
10 dBm max.
SRD category 2
< 1 % per h/< 10 % per h
10/100 MBit/s, Auto-MDIX
8
5 VDC
1.1 W
IP20
153 g
400 m
Advertisement
Table of Contents
