Subscribe to Our Youtube Channel
Related Manuals for Warmup konekt WIRELESS KW-BLR2CH
Summary of Contents for Warmup konekt WIRELESS KW-BLR2CH
- Page 1 Warmup konekt Wireless Boiler 2-Channel Switch KW-BLR2CH konekt W I R E L E S S Installation and operating manual...
- Page 2 Package Contents Quantity Description Warmup konekt Wireless Boiler 2-Channel Switch Screws 3.0 x 30 mm Wall Plugs 5 mm Quick Start Guide...
-
Page 3: Table Of Contents
Table of Contents Information about this manual ..............4 Hazard information ................... 4 Function and device overview ..............5 General system information ..............5 Mounting ....................6 Start-up ....................... 6 6.1 Pre-installation information ............... 6 6.2 Wiring information ................7 6.2.1 Connect Only UFH or Only Rads ............. -
Page 4: Information About This Manual
1 Information about this manual This manual should be read carefully before commencing operation of your konekt wireless products. Always retain the product manuals for future use. Symbols used: Hazard indication Important information 2 Hazard information Do not open the devices except as instructed to by the installation and operation manuals. -
Page 5: Function And Device Overview
Switching channel OUT2 (change-over contact) 4 General system information The Boiler Switch is part of the Warmup konekt Wireless System. Devices in the konekt Wireless System system can be easily paired and setup through the konekt Wireless Smart Hub using the konekt App. All functions of the konekt Wireless System are described in detail in the User Guide. -
Page 6: Mounting
5 Mounting You can flexibly mount the boiler switch for heating systems on walls using the supplied screws and plugs. • Open the cover (B) by removing the screws, (1) at the bottom and then (2) pulling the cover down and then • Use a pen to mark the four bore holes of the switch onto the wall where you plan to mount it. -
Page 7: Wiring Information
6.2 Wiring information The boiler switch must be configured in the konekt wireless App. The function of switching channel OUT1 (F) and if required, switching channel OUT2 (G) will need to be assigned using the App. Once paired to the Smart Hub you will be asked to assign this function. See section 6.3 to pair the device to the Smart Hub. 6.2.1 Connect Only UFH or Only Rads PE PE L▲... -
Page 8: Connect Ufh With Rads Or Dhw
6.2.2 Connect UFH with Rads or DHW PE PE L▲ 1▼ 2▼ 1▼ L▲ PE PE L▲ 1▼ 2▼ 1▼ L▲ 230 V AC / 50 Hz Heat Source Rads & DHW assignment UFH with DHW assignment OUT1 OUT1 Heating and cooling demand for floor Heating and cooling demand for heating actuators floor heating actuators... -
Page 9: Connect Air Dehumidifier
6.2.4 Connect air dehumidifier PE PE L▲ 1▼ 2▼ 1▼ L▲ PE PE L▲ 1▼ 2▼ 1▼ L▲ 230 V AC / 50 Hz Dehumidifier Air dehumidifier assignment OUT1 Dehumidification for floor heating actuators... -
Page 10: Pairing The Device To The Smart Hub
6.3 Pairing the device to the Smart Hub The wiring centre can be paired seamlessly to the konekt Wireless Smart Hub (KW-UKHUB). To pair devices to the Smart Hub please download the konekt app. The Smart Hub must be set up via the konekt App, before any other devices can be added to your system. -
Page 11: Duty Cycle
1% of an hour (i.e. 36 seconds in an hour). Devices must cease transmission when they reach the 1% limit until this time restriction comes to an end. Warmup devices are designed and produced with 100% conformity to this regulation. During normal operation, the duty cycle is not usually reached. -
Page 12: Restore Factory Settings
Declaration of Conformity Warmup hereby declares that the Warmup konekt Wireless radio equipment is compliant with RED Directive 2014/53/EU and Radio Equipment Regulations 2017. Please scan the QR Code for the Declaration of Conformity. -
Page 13: Technical Specifications
11 Technical specifications Warmup konekt Wireless Boiler 2-Channel Switch Product Code KW-BLR2CH Operating Voltage 230 V AC / 50 Hz Current Consumption 16 A max. Standby Power Consumption < 0.2 W IP Rating IP20 Protection Class Ambient Temperature 0 to 50 °C... -
Page 14: Warranty
This warranty does not cover removal or re-installation costs and shall not apply if it is shown by Warmup that the defect or malfunction was caused by failure to follow the instruction manuals, incorrect installation or damage which occurred while the product was in the possession of a consumer. - Page 15 Warmup plc www.warmup.co.uk uk@warmup.com Tel: 0345 345 2288 Fax: 0345 345 2299 Warmup plc 704 Tudor Estate Abbey Road London NW10 7UW Warmup GmbH Ottostraße 3 27793 Wildeshausen Warmup - OM - KW_Boiler Switch - V1.2 2021-06-04_EN...
Need help?
Do you have a question about the konekt WIRELESS KW-BLR2CH and is the answer not in the manual?
Questions and answers