Download
Share
Print this page
Canon TC-80N3 Quick Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Remote Control
  5. TIMER REMOTE CONTROLLER TC-80N3
  6. Quick manual

Canon TC-80N3 Quick Manual

Timer/remote controller
Hide thumbs Also See for TC-80N3:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
QuickGuide to Canon TC-80N3 Timer/Remote
Controller
Article ID: ART170210 | Date published: 05/02/2018 | Date last updated: 09/11/2018
Description
QuickGuide to Canon TC-80N3 Timer/Remote Controller
Solution
Overview
The TC-80N3 Timer/Remote Controller is a programmable electronic shutter release. When you
connect it to your EOS SLR or DSLR it will allow you to control:
1. when the shutter opens (self-timer mode)
2. how frequently the shutter opens (interval timer mode)
3. how long the shutter stays open (long-exposure timer mode)
4. how many exposures the camera will make in total (exposure count mode)
You can also combine modes: For example, you can program the controller to wait five minutes,
release the shutter, then take a total of 25 exposures at five minute intervals. Refer to the
Combinations Chart for more details.
The TC-80N3 also includes a remote switch that provides the same functions as your camera's
1 of 7

Advertisement

loading

Related Manuals for Canon TC-80N3

Summary of Contents for Canon TC-80N3

  • Page 1 25 exposures at five minute intervals. Refer to the Combinations Chart for more details. The TC-80N3 also includes a remote switch that provides the same functions as your camera’s 1 of 7...
  • Page 2 Connecting/Disconnecting the TC-80N3 1. Remove your camera’s remote control socket cover and place it in the holder provided on the back of the TC-80N3. 2. Insert the TC-80N3’s plug into your camera’s remote control socket by pressing the round 2 of 7...
  • Page 3 (0). To pause the self-timer before the shutter releases, press the Start/Stop button. Press it again to resume. • Do not use the TC-80N3 in combination with your camera’s self-timer. Doing so may interfere with the TC80N3's timer function.
  • Page 4 flash recycle time. If the time interval is less than the recycle time the shutter will not release until the flash unit has recycled. With Canon Speedlites that have the Save Energy (SE) feature, the flash will automatically recycle one minute before the exposure.
  • Page 5 5. Press the Start/Stop button. The camera will begin shooting and will continue until it completes the number of exposures you have. The TC-80N3 will count down the number of exposures. Unless you specify a specific interval, the exposures will be taken at one-second intervals.
  • Page 6 Release Button or your camera's shutter button. Also note that the timing or exposure count mode you have set will not be affected if you use the Release Button. During a long exposure that is controlled by the TC-80N3, however, the release button will be inoperable. ...
  • Page 7 © 2018 Canon U.S.A., Inc. All Rights Reserved. Reproduction in whole or in part without permission is prohibited. 7 of 7...