Related Manuals for HJM PECS
Summary of Contents for HJM PECS
- Page 1 ORIGINAL OPERATING INSTRUCTIONS Read carefully and retain for future reference Generic Top Electronics 1/24 HJM_PECS_ENG_Rev.0_02-10-2019 Made in Spain...
- Page 2 PROGRAMMABLE DIGITAL THERMOSTAT This radiator is equipped with various functions and operating modes that the user can select using the “MODE” button. The operating modes are: Pilot Wire, Comfort, Economy, Anti-Frost, Holidays, Timer, Turbo, Eco and Off (Stand-by). These are their related icons: ...
- Page 3 Other thermostat functions are: • Other functions and icons Open window detection: This function allows us to detect that a window is open due to a sudden drop in room temperature. In this case, the device stops feeding the resistance for a maximum of 30 minutes or until an abrupt increase in room temperature shows that the window has been closed.
- Page 4 SCREEN 1. ON / OFF (STAND-BY) Press the On/Off (Stand-by) button to turn the radiator on or to set the off/stand-by mode. If the off/stand-by mode is activated, the corresponding icon will appear on the screen and there will be two 0.5 second bleeps and the time will be shown. When the device is turned on, there will be a one second bleep and the icon will disappear.
-
Page 5: Main Functions
2. MAIN FUNCTIONS PILOT WIRE Mode: (FOR USE IN FRANCE ONLY). In this mode, the radiator is controlled by a unit with this type of system. In order to activate it, follow these steps: 1. Press the “Mode" button several times until the icon appears on the screen. - Page 6 it. When operating, it is possible to change the temperature easily by pressing the buttons. ANTI-FROST MODE: Selecting this mode, the room temperature is set at 7°C. In order to activate it, press the “Mode" button several times until the icon appears on the screen.
- Page 7 TURBO/BOOST MODE: This mode can be used when we need to heat the room quickly. In order to activate it, follow these steps: 1. Press the “Mode" button several times until the icon appears on the screen. Pressing the buttons it is possible to select the TURBO/BOOST period duration from 5 to 120 minutes.
- Page 8 To select this mode, press the “Mode" button several times until the icon appears on the screen. 3. OTHER FUNCTIONS AND ICONS OPEN WINDOW DETECTION: The radiator is able to detect if a window has been opened through a sudden drop in temperature (5°C in a maximum of 30 minutes). If this happens, the device disconnects for 30 minutes so as to, later on, operate again at the previously established mode if it detects continuous increases in temperature of one degree (because, for example, the window has been closed).
- Page 9 POWER LEVEL INDICATOR: This appears on the left-hand side of the screen and it depends on the programmed temperature level. The higher the programmed temperature is, the greater the number of bars shown on the icon. This is instantaneous consumption visualization as, the higher the programmed temperature is, the higher the energy consumption is.
- Page 10 2. Press the button for more than 3 seconds until the consumption data is shown on the screen. 3. Using the buttons, we can scroll the consumption menu. 4. The icons will appear on the right-hand side of the screen. Each one shows the consumed kWh during the corresponding period of time, as shown here: = current day = previous day...
- Page 11 4. PROGRAMMING DAY AND TIME PROGRAMMING 1. Turn the radiator to off/stand-by mode. The icon will be shown. 2. Press the button for more than 3 seconds until the functions can be seen. Using the button you can scroll through the following options: “ted”(hour and date), “prog”(programming) and “ofst”(calibration of the temperature sensor).
- Page 12 5. Pressing the button we select the COMFORT mode in this time interval (the whole interval will be highlighted). Pressing the button we select the ECONOMY mode for this time interval (half an interval will be highlighted). And so on until completing the 24 hours of day 1=Monday. Confirm the programming with the button.
- Page 13 4. With the buttons establish the temperature difference between the room temperature (measured with a thermometer) and the temperature detected by the radiator. This difference can be adjusted between -5°C and +5°C. 5. Press the button to confirm the selection. ACTIVATING OTHER FUNCTIONS OPEN WINDOW DETECTION 1.
-
Page 14: Thermal Safety
THERMAL SAFETY In the case of overheating, a safety device automatically cuts the radiators operation. After cooling the radiator will automatically reset. MAINTENANCE Your radiator requires no regular maintenance, however, to ensure its good operation: Always disconnect the device from the mains before performing any cleaning or maintenance operation. - Page 15 EU Declaration of Conformity Product: Ceramic Heater Trademark: Models: PECS PECS1000. Types: PECS1500. PECS2000. Batch & Serial No.: Mx- YYDDD-XXX (1) Explanation of code "Lot & Serial No.": Lot = Mx - YYDDD; where: Mx = Production Line No.; YY = year (15,16,17...99) and DDD = jour corrélative (001,..., 365).
- Page 16 Model: PECS Item Value Unit Item Unit Symbol Type of heat output/room Heat output temperature control (select 2000 one) single stage heat Nominal heat output output and no room temperature control Two or more manual Maximum continuous stages, room max,c...
- Page 17 Heat output with black bulb sensor 1000 Nominal heat output Maximum continuous max,c heat output Auxiliary electricity consumption At nominal heat output 0.0005 In standby mode HERMANOS JULIÁN M., S.L. Head Office: Esposos Curie,44 / Factory: Gutenberg,91-93 Polígono Industrial “Los Villares” . Contact details 37184 Villares de la Reina .
- Page 18 RECYCLING (Disposal of the product at the end of its useful life) According to European Directive 2012/19/UE, on waste electrical and electronic equipment (WEEE), old electrical household appliances cannot be disposed of in the usual municipal containers; they have to be collected separately to optimise the recycling of the components and materials that comprise it, and reduce the impact on human health and the environment.
- Page 19 Made by HERMANOS JULIAN M., S.L. Factory: Gutenberg,91-93 Polígono Industrial “Los Villares” ES-37184 Villares de la Reina . Salamanca . Spain +34 923 222 277 - +34 923 222 282 Fax: +34 923 223 397 Web: www.calorhjm.es ESB-37295664 24/24 HJM_PECS_ENG_Rev.0_02-10-2019 Made in Spain...
Need help?
Do you have a question about the PECS and is the answer not in the manual?
Questions and answers