Shenzhen Sonoff Technologies Co., Ltd. English Product Introduction Restart Button Pairing button/Physical switch Wi-Fi LED indicator(Blue) Features This device is a smart switch with the features of high-power (25A) and power monitoring that allows you to remotely turn on/off the device, schedule it on/off or share it with your family to control together.
Page 9
Shenzhen Sonoff Technologies Co., Ltd. English 2. Wiring instruction Light fixture wiring instruction: NIn LOut 100-240V AC LIn Appliance wiring instruction: LOut LIn 100-240V AC NIn Make sure the neutral wire and live wire connection is correct.
Page 10
Shenzhen Sonoff Technologies Co., Ltd. English 3. Download App eWeLink eWeLink Android™ & iOS 4. Power on After powering on, the device will enter the quick pairing mode during the first use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash and release. The device will exit the quick pairing mode if not paired within 3mins.
Enter Wi-Fi password, tap “Next ” and then “Connect ”. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink app and tap “Next”. Be patient until pairing completes. Specifications POWR3 Model Input 100-240V AC 50/60Hz...
Shenzhen Sonoff Technologies Co., Ltd. English Switch Network Select the "Wi-Fi Settings" in the "Device Settings" interface on the eWeLink App to change. POWR3 Device Settings Power-onState OFF Inching Settings Power Current Voltage 0.00 0.00 0.00 Rate WiFiSettings WiFiSettings Device info...
Shenzhen Sonoff Technologies Co., Ltd. English Common Problems Fail to pair Wi-Fi devices with eWeLink APP 1. Make sure the device is in pairing mode. The device will automatically exit the pairing mode if not paired within 3mins. 2. Please turn on the location service on your mobile phone and give the permission. Before choosing the Wi-Fi network, the location service should be turned on and the permission is given.
Page 14
Shenzhen Sonoff Technologies Co., Ltd. FCC Warning FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 15
Hereby, Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type POWR3 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals Shenzhen Sonoff Technologies Co., Ltd.