BaBylissPro FX870BASE-GA Operating Instructions

FX870BASE-GA, FX870BASE-RGA & FX870BASE-SA
FX787BASE-GA, FX787BASE-RGA & FX787BASE-SA
OPERATING INSTRUCTIONS
• Remove charging base from package.
• Plug your existing adapter that came with your clipper/trimmer
into the back of the charging base. Plug the other end of the
adapter into the wall outlet. In case you lost your original adapter,
we sell separate adapter (model number BFSCORDA).
• Once your adapter is plugged in, you can place your clipper/
trimmer into the opening and begin charging. THE LED ON YOUR
CLIPPER/TRIMMER UNIT SHOULD SLOW BLINK TO ENSURE YOUR
CHARGING HAS BEGUN.
• IMPORTANT THAT YOU DON'T OVERCHARGE YOUR CLIPPER/
TRIMMER AS THIS CAN DAMAGE THE BATTERY. IF YOU'RE NOT
USING FOR AN EXTENDED PERIOD OF TIME, WE RECOMMEND
REMOVING FROM THE CHARGING BASE.
IB-21/326