BMW X3 Owner's Manual page 148

CONTROLS
Displays
Via iDrive:
1. "My Vehicle"
2. "Technology in action"
3. "Sport displays"
Speed warning
Concept
The system can be used to set a speed limit. A
warning will be issued when this speed limit is
exceeded.
General information
The warning is repeated if the vehicle speed ex‐
ceeds the set speed limit again, after it has drop‐
ped below it by 3 mph/5 km/h.
Adjusting
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Warning at:"
5. Turn the Controller until the desired speed is
displayed.
6. Press the Controller.
Activating/deactivating
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Speed warning"
148
Displays
Online Edition for Part no. 01405A1F693 - X/20
Setting your current speed as
the speed warning
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Speed warning"
4. "Select current speed"
Vehicle status
General information
The status can be displayed and actions per‐
formed for several systems.
Opening the vehicle status
Via iDrive:
1. "My Vehicle"
2. "Vehicle status"
Information at a glance
Symbols Description
"Flat Tire Monitor": status of the
run-flat tires, refer to page 309.
"Tire Pressure Monitor": status
of the Tire Pressure Monitor
TPM, refer to page 302.
"Engine oil level": Electronic en‐
gine oil level check, refer to
page 320.
"Check Control": displaying
stored Check Control mes‐
sages, refer to page 139.
"Service required": displaying
service notifications, refer to
page 141.
"Teleservice Call": Service Re‐
quest.