BMW X3 Owner's Manual page 106

CONTROLS
The following settings are not stored:
▷ Backrest width.
▷ Lumbar support.
Safety information
Warning
Using the memory function while driving can
lead to unexpected seat or steering wheel
movements. Vehicle control could be lost.
There is a risk of accident. Only retrieve the
memory function when the vehicle is stationary.
Warning
There is a risk of jamming when moving the
seats. There is a risk of injury or risk of damage
to property. Make sure that the area of move‐
ment of the seat is clear prior to any adjust‐
ment.
Overview
The memory buttons are located on the front
doors.
Storing
1. Set the desired position.
2. Press the button. The writing on the
button lights up.
3. Press desired button 1 or 2 while the LED is
lit. A signal sounds.
106
Seats, mirrors and steering wheel
Online Edition for Part no. 01405A1F693 - X/20
Calling up settings
Press the desired button 1 or 2.
The stored position is called up automatically.
The procedure stops when a switch for setting
the seat is pressed or one of the memory but‐
tons is pressed again.
Once underway, adjustment of the seat position
on the driver's side is disabled after a short while.
Seat heating
Overview
Front
Seat heating
Rear
Seat heating