Advertisement
5.2.
Tensioner Retaining Clamp VS4571 (Fig.2)
5.3.
Timing belt replacement on 2.2 VTEC H22 engines requires the removal of the automatic tensioner.
5.3.1.
In order to re-install the tensioner in its retracted condition it is essential to use VS4571 Clamp.
5.3.2.
To retract the tensioner plunger carefully clamp the tensioner upright in a vice (maintenance bolt pointing up) and remove the bolt.
IMPORTANT: Ensure no oil has spilt out of the tensioner. If oil has leaked out, drain the unit completely and re-fill with engine oil
V
(0.22 fl.oz.).
5.3.3.
Insert a screwdriver into the top of tensioner and turn clockwise to compress the tensioner. Retain in the retracted position by
fitting VS4571 Clamp and install the maintenance bolt.
5.3.4.
Ensure the crankshaft and camshaft timing marks are aligned and fit the new belt making sure it is taut on the non-tensioned side.
5.3.5.
Install the automatic tensioner and remove VS4571 Clamp to allow plunger to operate.
5.4.
Camshaft Locking Pins VS3032.02 (Fig.3)
5.4.1.
On Honda B16/18/20 twin cams, and engines in Rover 216Gti/416Gti models, the camshafts are locked in position, on their timing
marks, by the use of two locking pins.
5.4.2.
This method of locking is achieved by inserting VS3032.02 Locking Pins through assigned holes in the camshaft housing, engaging
and locking the camshafts in position.
5.5.
Tensioner Adjusting Bolt VS4360T3 (Fig.4)
5.5.1.
VS4360T3 is used to 'lock' the tensioner away from the belt during the timing belt replacement applications on those engines
detailed in Applications.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Fig.3
Environmental Protection
Sole UK Distributor, Sealey Group.
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk.
IP32 7AR
Original Language Version
01284 757500
01284 703534
VS4656 | Issue 4(SP) 16/06/16
Fig.4
www.sealey.co.uk
Web
sales@sealey.co.uk
Advertisement
