Advertisement
Quick Links
INSTALLATION
1. ATTACH SLIDING RADIAL DAMPER
TO TOP SIDE OF NECK.
3. USE MINIMUM 12 SWG STEEL WIRE TO
SUPPORT THE CORNERS OF THE DI-PSP.
MINIMUM OF TWO DIAGONAL CORNERS
MUST BE SUPPORTED BY CEILING JOISTS.
DROP-IN PERFORATED SUPPLY PLENUM
2. PLACE THE PLENUM IN THE DESIRED LOCATION
OF THE 24" X 24" T-BAR CEILING GRID.
4. ATTACH SUPPLY DUCT TO PLENUM NECK
USING A STEEL CLAMP OR 16 SWG MINIMUM
STEEL WIRE. THE DUCT CONNECTION MUST
NOT INTERFERE WITH DAMPER OPERATION.
MODELS: DI-PSP
DI-FUSE
Advertisement
Related Manuals for CaptiveAire DI-PSP
Summary of Contents for CaptiveAire DI-PSP
- Page 1 TO TOP SIDE OF NECK. 3. USE MINIMUM 12 SWG STEEL WIRE TO 4. ATTACH SUPPLY DUCT TO PLENUM NECK SUPPORT THE CORNERS OF THE DI-PSP. USING A STEEL CLAMP OR 16 SWG MINIMUM MINIMUM OF TWO DIAGONAL CORNERS STEEL WIRE. THE DUCT CONNECTION MUST MUST BE SUPPORTED BY CEILING JOISTS.
- Page 2 OPERATION • TO ACCESS THE SLIDING RADIAL DAMPER FOR VOLUME ADJUSTMENT, REMOVE THE STEEL PLUG AT THE CENTER OF THE BOTTOM PERFORATED PANEL. • THE DAMPER CAN BE ADJUSTED USING A FLAT-HEAD SCREWDRIVER OR 3/8” SOCKET (MINIMUM 8” BLADE LENGTH REQUIRED). GENERAL MAINTENANCE •...
Need help?
Do you have a question about the DI-PSP and is the answer not in the manual?
Questions and answers