Pyle 3017DX Owner's Manual page 7

10. MO/ST SELECTOR (FOR STEREO VERSION)
At FM band, push it to select stereo mode or mono mode. When stereo reception is
changed, the stereo indicator (LED) will be light or LCD display will indicate "
10. MUTE SELECTOR (FOR MONO VERSION)
Push it down to mute down sound output level and the mode indicator will be light.
Push it again to resume sound output level.
11. TONE CONTROL (FOR STEREO VERSION)
Rotate the knob clockwise or anticlockwise to adjust the sound quality.
11. BASS CONTROL (FOR MONO VERSION)
Rotate the knob clockwise or anticlockwise to adjust the low frequency sound level.
12. FREQUENCY DISPLAY
• For LED digital readout: The display shows the frequency of the broadcasting station
being received.
• For LCD readout: The display will show the current frequency and state of the unit.
• For analog unit: The dial pointer indicates the frequency of current reception.
13. VOLUME CONTROL
Rotate the knob clockwise or anticlockwise to adjust sound level.
14. CD INPUT JACK (FOR CD INPUT VERSION ONLY)
The unit can be connected to a portable CD player through this jack.
15. FLASHING LED (FOR STEREO VERSION ONLY)
If the front panel do not install in the main unit, the LED will be flashing.
16. RESET
Reset button is placed on the housing and must be activated with either a ball point or thin
metal object. The reset button is to be activated for the following reasons:
• Initial installation of the unit when all wiring is completed.
• All the function buttons do not operate.
• Error symbol on the display.
Note: If press RESET button, the unit can't work yet, please use a cotton swab soaked in
isopropyl alcohol to clean the back of the front panel.
7
".