Directed Electronics Car Alarm Owner's Manual page 30

If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the transmitter will not
disarm VRS
sequence:
note: If the VRS
the ignition must be turned off, then on to disarm. If you
are driving the vehicle at the time, pull to a safe place
away from traffic and follow the triggered sequence dis-
arm procedure.
© 2005 directed electronics—all rights reser ved
twice.
. To disarm the VRS
®
1. Turn the ignition on.
2. Press the Valet switch the pre-
programmed number of times to
disarm the VRS
system has begun its chirping sequence,
®
during a VRS
®
system.
®
trigger
®
DRW-35
27