Suntherm HAL Instruction Manual

Infrared heating panel

Advertisement

Available languages

Available languages

INFRAROT HEIZPANEEL
INFRARED HEATING PANEL
SUNTHERM HAL
BEDIENUNGSANLEITUNG
seite 2-4
INSTRUCTION MANUAL
page 5-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HAL and is the answer not in the manual?

Questions and answers

Summary of Contents for Suntherm HAL

  • Page 1 INFRAROT HEIZPANEEL INFRARED HEATING PANEL SUNTHERM HAL BEDIENUNGSANLEITUNG seite 2-4 INSTRUCTION MANUAL page 5-7...
  • Page 2 Instruktionen in der Sektion Montage. Ausmäße und Leistungsaufnahmen finden Sie der folgenden Tabelle. AKTUELL (W) A (mm) B (mm) C (mm) SUNTHERM HAL 200 SUNTHERM HAL 300 SUNTHERM HAL 400 SUNTHERM HAL 400p SUNTHERM HAL 500 SUNTHERM HAL 600...
  • Page 3 ANBRINGUNG Die Heizpaneele sind zum selbständigen Stehen im Interieur geeignet. Das Panel muss in einer Mindestentfernung von 0,2 m von der Ecke des Zimmers gelegt werden. Vor dem Heizpaneel muss ein Freiraum von mindestens 0,5 m vorhanden sein, um eine freie Luftzirkulation zu gewährleisten und eine Überhitzung zu vermeiden. Das Paneel darf nicht in der unmittelbaren Nähe der Steckdose oder eines elektronischen Gerät gelegt werden.
  • Page 4 MONTAGE 1. Legen Sie die beigefügten Stellfüße an die Kanten 2. Schrauben Sie die Stellfüße auch an der Rückseite des Heizpaneels an und schrauben Sie diesean der fest. Bei der Fahrbarenversion sind die beigefügten Unterseite fest. Räder noch Bestandteil der Stellfüße.
  • Page 5 The product comes dismantled. Assemble it before use according to the instruction in the MOUNTING section. The dimensions and power of individual models are listed in the table below. POWER (W) A (mm) B (mm) C (mm) SUNTHERM HAL 200 SUNTHERM HAL 300 SUNTHERM HAL 400 SUNTHERM HAL 400p SUNTHERM HAL 500 SUNTHERM HAL 600...
  • Page 6 PLACEMENT These heating panels are designed to stand freely in the interior. Place the panel at a distance of at least 0.2m from the room corner. There must be at least 0.5 m of unobstructed air space in front of the panel to ensure free circulation of air and to prevent overheating.
  • Page 7 1. Put the stands to the panel edges and bolt the lower 2. Bolt the screw from the back side. The wheels couple of the enclosed screws. are constituents of the stands in case of the mobile version. Compliant MADE IN EU office@suntherm-austria.at www.suntherm.at...

This manual is also suitable for:

Hal 200Hal 300Hal 400Hal 500Hal 600

Table of Contents