Download Print this page
Elipson planet L Quick Start Manual

Elipson planet L Quick Start Manual

Ceiling mount

Advertisement

Quick Links

Merci d'avoir choisi les produits Elipson.
Prenez le temps de lire attentivement ce mode d'emploi
avant d'installer ce support.
B1
B2
1.
2.
Cher Client,
Dans le colis | In the box
B3
x1
B4
x1
Non fourni |
Not Provided
B3
ceiling mount
x1
x3
Étape 1 | Step 1
Ou / Or
Dear Customer,
Thank you for choosing Elipson products.
Take time to read this manual carefully
before installing this ceiling mount.
A1
M4 x 10
A3
A2
3 mm
x1
B6
B5
x3
1.
2.
x1
2 mm
x1
x3
B3

Advertisement

loading

Summary of Contents for Elipson planet L

  • Page 1 Cher Client, Dear Customer, Merci d’avoir choisi les produits Elipson. Thank you for choosing Elipson products. Prenez le temps de lire attentivement ce mode d’emploi Take time to read this manual carefully avant d’installer ce support. before installing this ceiling mount.
  • Page 2 Étape 1 | Step 1 Ou / Or Non fourni | Not Provided Choisissez les vis et les chevilles de montage en fonction de la nature de votre plafond. Le poids du sytème " enceinte + support " est de : 9,5 Kgs | | 21 Lbs Choose screws and dowels for mounting according to your roof material.
  • Page 3 Étape 3 | Step 3 Please carefully adjust locker position to prevent scratch on the sphere : Very close to the ring or far from the ring. Positionner l’arrêtoir de manière à ne pas endommager la sphère : Très proche de l'anneau ou éloigné de la sphère. 110mm above Very close to the ring Étape 4 | Step 4...
  • Page 4 Étape 5 | Step 5 Étape 6 | Step 6 Verrouiller le support grâce à la vis de sécurité | Security lock screw Non fourni / Not Provided...
  • Page 5 Étape 7 |Step 7 Positionner délicatement l'enceinte au centre de l'anneau | Place delicately the loudspeaker in the ring Étape 8 |Step 8 Raccordement des câbles aux borniers de l'enceinte | Wire connection Éteignez l'amplificateur avant toute manipulation Turn off the amplifier before any handling...
  • Page 6 Étape 9 | Step 9 Please carefully adjust locker position to prevent scratch on the sphere : Very close to the ring or far from the ring. Positionner l’arrêtoir de manière à ne pas endommager la sphère : Très proche de l’anneau ou éloigné de la sphère. Update: 01- 12 - 2020...