Table of Contents
Advertisement
10. PROBLEM SOLVING
The dust extractors are designed and manufactured for severe environments
and tasks, but the user must note that the machine must be protected from
knocks and blows. Filter, seals, attachments, and connections are carefully
adapted and selected with regard to the operator's work environment.
Therefore, the operator and service personnel must treat the machine with
care in order for it to work correctly for many years.
Issue
Motor doesn't start
Motor stops immediately after
starting
Motor runs but there is no suction
Motor runs but poor suction
Dust blown from motor
Abnormal noise
Notice ！！！
Any other problem please contact Dynamic Diamond Tooling
______________________________________________________
Dynamic Diamond Tooling
Tel: 407-298-7050
www.dynamicdiamondtooling.com
1924 Silver Star Road, Orlando, Florida 32804
Cause
No Power
Cable defective
Switch defective
Soft start defective
Wrong fuse
Shortcut in cable/machine
Hose not connected
Hose clogged/blocked
No dust collection bag
Hole in hose
Filter clogged
Loose top cover
Defective gaskets
Wrongly assembled or
damaged filter system
____________________________________
Solution
Plug in machine
Replace cable
Replace switch
Replace soft star
Connect to correct fuse
Order service
Connect hose
Clean hose
Fit dust collection system
Replace hose
Clean filter/Replace filter
Adjust
Replace affected gaskets
Adjust/Replace filters
Order service
Advertisement
Table of Contents
