DeWalt N000589 Instruction Manual page 9

WARNING: RISk of elec tRI cAl Shock
WHat can HaPPen
• Spray directed at electrical
outlets or switch es, or ob jects
con nect ed to an elec tri cal
circuit, could re sult in a
fatal electrical shock.
WARNING: RISk of INjuRy fRom lIftING
WHat can HaPPen
• Serious injury can result
from attempting to lift too
heavy an object.
Save theSe inStructionS
For Future uSe
HoW to PreVent It
• Unplug any electrically
op er at ed product before
attempting to clean it. Direct
spray away from electric
out lets and switches.
HoW to PreVent It
• The pressure washer is too
heavy to be lifted by one
person. Obtain assistance
from others before lifting.
inStaLLation
Pressure Washer Assembly (Fig. 1)
1. Place handle assembly (O) onto frame, depress
the snap buttons, and slide the handle assembly
onto the frame (F) until snap buttons are secured
in place.
cAutIoN: Risk of personal injury. Avoid placing
hands between handle and frame when assembling
to prevent pinching.
2. Attach high-pressure
hose (P) to spray gun.
Make sure it is
secure.
3. Connect wand (E) to
spray gun. Make sure
connection is secure.
4. Thread the side handle (D) into spray
gun and tighten to desired position.
5. Place the nozzle holder (B) onto the
panel assembly (A) and push each
nozzle holder into place.
9
O
F
P
E
D