Adjusting The Height Of The Upper Basket - Beko BDF1640DX User Manual

Preparation
Adjusting the height of the
upper basket
(depends on model)
Upper basket height adjustment mechanism
is designed so that you can create wide
spaces on the upper or lower compartment
of the machine by adjusting the basket
upwards or downwards either while it is
empty or full.
Thanks to this mechanism, you may use your
basket in three different positions, namely
lower, center or upper positions.
To lower the basket, perform the following
while the basket is at uppermost position;
1. Hold the wires of the upper basket and
raise the handle of the mechanism
upwards as shown in the figure (A).
2. Lower the basket to the next lower
position.
3. Release the basket when it catches on
to the next lower position.
Repeat the same operation if the height is
not adequate.
1. To raise the basket, hold the wires of the
basket and pull the basket upwards with
both hands while the basket is at the
lowermost position (B)
2. Release the basket when it catches on
to the next upper position with a "Click"
22 /43 EN
that may be heard from the right and
left mechanisms.
Repeat the same operation if the height is
not adequate.
The movement mechanism may not
work properly when the upper basket is
overloaded or when the load is
unbalanced. And it may fall to the next
lower position in heavier conditions.
Ensure that the adjustment
mechanisms on the right and left of the
upper basket are aligned.
1
2
3
1
2
3
/