Advertisement
3.Installation Dimensions
When the wind baffles are used install units as shown in the illustrations below. Ensure minimum clearances are met to a wall
or other obstruction. When installing multiple units, ensure unit minimum clearances are met or exceeded.
Failure to provide minimum clearances will affect unit performance. Nuisance unit cycling or premature equipment failure may
result. For other installation clearances, referring to the unit installation manual.
(1) One unit Installation
Unit : in (mm)
Wall surface
20(500) or more
20(500) or more
(2) Multiple unit Installation Unit : in (mm)
Wall surface
20(500) or more
20(500) or more
20(500) or more
20(500) or more
20(500) or more
20(500) or more
4.Installation Instructions
(1) Remove existing screws as shown in Figure 1. (Do not lose the screws.) Using the same screws, locate and secure the wind
baffle as shown in Figure 2.
(2) Using the self-tapping screw provided, secure the wind baffle upper right corner as shown in Figure 3.
IMPORTANT- Use caution when installing ALL screws, as they must not be overtightened!
Figure 1
Figure 2
Figure 3
Advertisement
