Advertisement
Quick Links
3E0740 SmartReader Extension Mounting Kit Installation
SmartReader Extension Mounting
Kit installation
The Extension Mounting Kit contains:
1 x Extension cable (4m)
1 x Mounting bracket
2 x metal tek screws
Mount the Antenna Panel
Mount the Antenna Panel as per your SmartReader manual.
Mounting the Electronic Controller
Considerations
The Extension cable is part of the Antenna Panel circuit so keep
away from large metal surfaces.
Ensure the Electronic Controller mounting location provides
protection from being knocked or damaged by animals.
Ensure the Extension cable is run so it can not be damaged or
tripped over.
Protect the Extension cable from damage from the environment,
animals, people or weather. Avoid mounting the Extension cable
in wet areas.
The Gallagher SmartReader BR Series Electronic Controller
needs to be able to be removed to recharge the internal batteries.
The extension cable length is 4 m.
Page 1
Advertisement
Related Manuals for Gallagher SmartReader 3E0740
Summary of Contents for Gallagher SmartReader 3E0740
- Page 1 Protect the Extension cable from damage from the environment, animals, people or weather. Avoid mounting the Extension cable in wet areas. The Gallagher SmartReader BR Series Electronic Controller needs to be able to be removed to recharge the internal batteries. The extension cable length is 4 m.
- Page 2 3E0740 SmartReader Extension Mounting Kit Installation Procedure 1. Determine the location of the Electronic Controller based on the above considerations. 2. Using the supplied metal tek screws attach the mounting bracket to a solid mounting location using at least two of the holes in the mounting bracket.
- Page 3 The SmartReader is now ready to use. PUBLISHED BY Gallagher Group Limited Kahikatea Drive, Private Bag 3026 Hamilton, New Zealand www.gallagherams.com Copyright© Gallagher Group Limited 2006. All rights reserved. Patents Pending. Gallagher SmartReader BR Series Instruction Manual 3E0740 - October 2006 Page 3...