Technical Data - Bresser BR-10RGB Instruction Manual

3 SPECIAL LIGHTING EFFECTS MODE
Hold the Function button for 3 seconds when the light is on, to enter
the mode of programmed special lighting effects. Hold the Function
button for another 3 seconds to enter the mode of color temperature
and RGB.
Note: Please make sure that you hold the Function button enough
for 3 seconds while switching the modes between special lighting ef-
fect and color adjustment (RGB color selection), otherwise the light
will be turned off.
In the mode of special lighting effect, shortly press Function button
to switch among different lighting options from F1 to F10.
F1: Thunder flash
F2: Fireworks
F3: Candle
F4: TV
F5: Bad bulb
F6: Paparazzi
F7:SOS
F8: Police car
F9: Ambulance
F10:Flicker
UP / DOWN button to increase or decrease the brightness.
4 EXTERNAL POWER SUPPLY
Use the original power adapter to extend the work time.
5 INFRARED CONTROL
Control the power switch, dimmer, color temperature, color selection
and special lighting effects through the infrared remote control.
6 OPERATING AND USING
THE DEVICE
1. Powering on or off the light tube.
2. Hold the Power button for 1 second and release it to switch on or
off the device.
ADJUSTING THE BRIGHTNESS
Press Up or Down button to increase or decrease the brightness.
ADJUSTING THE COLOR TEMPERATURE AND
SELECTING RGB COLORS
Shortly press the Function button by 9 steps to choose the color tem-
perature from 3000K, 4500K, 6000K and 6 different colors when the
light is on.
7 MAGNETIC ATTACHMENT
The light tube comes with magnetic parts which are used to be at-
tached on somewhere on metal surface.
DISPOSAL
Dispose of the packaging materials by type. Contact your local
waste-disposal service or environmental authority for informa-
tion on the proper disposal.
Do not dispose of electronic devices in the household garbage!
According to the European Directive 2002/96/EU on Waste
Electrical and Electronic Equipment and its transposition into
national law, used electrical equipment must be collected separately
and recycled in an environmentally sound manner.
Observe the current legal regulations when disposing of the device!
Information on proper disposal can be obtained from municipal
waste disposal service providers or the Environmental Agency.
not included / Use only recommended accessories!
3
CLEANING
Before cleaning the device, disconnect it from the power supply (re-
move plug or remove batteries)!
Only use a dry cloth to clean the exterior of the device. To avoid dam-
aging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. Store it in the supplied
bag or transportation packaging. The batteries should be removed
from the unit if it has not been used for a long time.
EC DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the applicable
directives and corresponding standards has been prepared by
Bresser GmbH. This can be viewed at any time upon request at www.
bresser.de/download/F004547/CE/F004547_CE.pdf
UKCA DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the applicable
directives and corresponding standards has been prepared by
Bresser GmbH. This can be viewed at any time upon request at
www.bresser.de/download/F004547/UKCA/F004547_UKCA.pdf

TECHNICAL DATA

Model
Art. No.
Type
LED illuminant
Max. Power
Luminous flux
Colour temperature
Light dimming
Power supply
(to load built-in rechargeable battery)
Battery type
4
Dimensions
The LEDs have a long lifetime and are not replaceable due to technical reasons.
1
The power of an LED lighting is higher than that of conventional halogen lights. Therefore,
2
LED's have a lower wattage than comparable lights.
Not included in the scope of delivery / Only use recommended accessories!
3
GUARANTEE
The regular warranty period is 5 years and begins on the day of pur-
chase. You can consult the full guarantee terms as well as informa-
tion on extending the guarantee period and details of our services at
www.bresser.de/warranty_terms.
www.bresser.de/warranty_terms
10RGB
F004547
LED light tube
0.2 Watts High Bright SMD LEDs
50 pcs each for warm/daylight/RGB
10W
2
1200LM
3000 - 6000K
10% to 100%
DC5V2A via power adapter
2200mAh Li-Ion, built-in
32x500mm
4