General Warnings; Delivery Content; Power Supply - Bresser BR-10RGB Instruction Manual

GENERAL WARNINGS

DANGER OF BODILY INJURY!
Do not use in the presence of children or animals. Store out of reach
of children and animals.
Never touch parts of the device during operation or before it has
cooled down completely (approx. 45 min. after switching off)!
RISK OF GLARE!
Make sure that people and animals do not look into the light. The
high luminosity can cause glare to the eyes and afterimages. This im-
pairment of vision can lead to accidents.
RISK OF MATERIAL DAMAGE!
Make sure that no one can trip over connection cables of the device.
The device could be knocked over.
The manufacturer accepts no liability for damage to property caused
by improper or insufficiently safe installation!
Only use the recommended power supply unit or the recommended
rechargeable batteries for the power supply!
4
The manufacturer accepts no liability for voltage damage caused by
the use of an unsuitable power adapter!
DANGER OF AN ELECTRIC SHOCK!
This device contains electronic parts that are powered by a power
source (power adapter). Only use the device as described in the man-
ual. Otherwise, you run the DANGER of an ELECTRIC SHOCK.
Never bend, squeeze or pull power cables, connecting cables, exten-
sions or connectors. Protect cables from sharp edges and heat.
Check this device, cables and connections for damage before use.
Never attempt to operate a damaged device, or a device with dam-
aged electrical parts! Damaged parts must be replaced immediately
by an authorized service agent.
Operate the device only in a completely dry environment and do not
touch the device with wet or damp body parts.
FIRE/EXPLOSION HAZARD!
Always place the device in such a way that it cannot tip over and en-
sure that it is stored in a reasonably safe place.
• Keep children and animals away from the device! They could knock
the device over.
• Make sure that no one can trip over connection cables. The device
could be knocked over.
• Do not expose the device to high temperatures. Do not short-circuit
the device or dispose of in fire! Excessive heat and improper han-
dling can cause short circuits, fires and even explosions!
• Never cover the ventilation slots or cooling fins of the device during
operation or until it has cooled down completely!
• Only use the recommended power supply unit or batteries
IMPORTANT NOTE!
Do not disassemble the device! In the event of a defect, please con-
tact your dealer. They will contact the Service Center and can arrange
the return of this device for repair if necessary.
Disconnect the power supply by pulling the mains plug when the ap-
pliance is not in use, in case of a longer interruption of operation and
before any maintenance and cleaning work.
Place your device so that it can be disconnected from the power sup-
ply at any time. The power outlet should always be near your appli-
ance and should be easily accessible, as the plug of the power cord
serves as a disconnect device from the mains supply.
To disconnect the unit from the mains, always pull the mains plug
and never pull the cable!
Do not subject the device to excessive vibrations.
1 PARTS LIST & DELIVERY CONTENT
Fig. 1
1.1 PARTS LIST
 Function indicator  UP button  Power/Function button
 DOWN button  Battery charging port
!
4

1.2 DELIVERY CONTENT

LED Light tube with built-in rechargeable battery (1x), power adapt-
er with cable (1x), remote control (1x), instruction manual (1x)

2 POWER SUPPLY

NOTE: This device is powered by the built-in rechargeable battery.
Before commissioning, make sure that it is fully loaded. Only use the
mains adapter supplied for charging!
Press Power/Function button to power on the device.
Fig. 2
Fig. 3
(Fig. 1-3)
(Fig. 1-3)
ON FLASH OFF
10% 50% 100%
LIGHTNESS
COLOR