Table of Contents
Advertisement
Quick Links
Check Your Package Contents
These are the items included with your DES-1050G purchase:
DES-1050G
Notice Before Setup the DES-1050G
The setup of the Switch can be performed using the following steps:
A. Install the DES-1050G in a fairly cool and dry place. See Technical Specifications for the acceptable
operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
D. Visually inspect the power cable and ensure that it is firmly inserted into a suitable power outlet.
Installation
Desktop or Shelf Installation
When installing the Switch on a desktop or shelf,
the rubber feet included with the device must be
first attached. Attach these cushioning feet on
the bottom at each corner of the device. Allow
enough ventilation space between the device and
the objects around it.
Quick Installation Guide
DES-1050G
Quick Installation
Guide
Power Cord
Rack Installation
The Switch can be mounted in an EIA standard
size, 19-inch rack, which can be placed in a
wiring closet with other equipment. To install,
attach the mounting brackets on the switch's
Front Panel (one on each side) and secure them
with the screws provided.
Then, use the screws provided with the
equipment rack to mount the Switch in the rack.
Rack-mount bracket
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for D-Link DES-1050G
Summary of Contents for D-Link DES-1050G
- Page 1 Notice Before Setup the DES-1050G The setup of the Switch can be performed using the following steps: A. Install the DES-1050G in a fairly cool and dry place. See Technical Specifications for the acceptable operation temperature and humidity ranges. B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and direct sunlight.
- Page 2 Connecting the DES-1050G to your network Front panel DES-1050G A. Power The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60 Hz. The Switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.
- Page 3 TECHNICAL SUPPORT You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: D-Link Middle East - Dubai, U.A.E. Tel: 1300-700-100 Plot No. S31102, 24/7 Technical Support Jebel Ali Free Zone South, Web: http://www.dlink.com.au P.O.Box 18224, Dubai, U.A.E.
- Page 4 TECHNICAL SUPPORT Iran Unit 1, 1st Floor, Plot No 3, Pazhoheshgah (2) Alley, Ahmad Ghasir (Bokharest) St. , Shahid Beheshti (Abbas Abad) St. , Tehran, Iran. Postal Code : 1514615911 Tel: +98-21-88880918,19 General Inquiries: info.ir@dlinkmea.com Tech Support: support.ir@dlinkmea.com Morocco M.I.T.C Route de Nouaceur angle RS et CT 1029 Bureau N°...
Need help?
Do you have a question about the DES-1050G and is the answer not in the manual?
Questions and answers