Sub Board Removal - Lenovo Motorola G7 Power NA Service And Repair Manual

Motorola G7 Power NA
Level 2 – Service and Repair Manual

Sub Board Removal

NOTE
The Sub Board can be recovered and
reused after removal.
1. Use the flat end of the Black Stick to remove the
Main Flex BtB Connector from the Sub Board.
2. Use the Plastic Tweezer to remove the Coax
Cables from the Sub Board as shown.
Use the Torque Driver with T5 Torx Bit to
3.
remove the screw as shown.
4. Use the flat end of the Black Stick to remove the
Sub Board from the location as shown.
PAGE 40
Lenovo Confidential Restricted:
Do not share without consent from Lenovo