Installing Bluetooth And Gps Supports; Installing The Front Camera To The Main Board - Huawei U9200 Maintenance Manual

8.9 Installing Bluetooth and GPS Supports

Step 1 Prepare a Bluetooth support, and check
whether it is in good condition.
Step 3 Prepare a GPS support, and
check whether it is in good condition.

8.10 Installing the Front Camera to the Main Board

Step 1 Place a front camera
on the anticipation bender.
Step 4 Connect the two
connectors on the front
camera and the main board.
(2012-06-13)
U9200 Maintenance Manual
Step 4 Align the GPS support with the
positioning groove on the main board, and
install it to the correct position.
Step 2 Bend the front
camera FPC.
Align the camera
with the two pins.
Step 5 Install the front camera
to the correct position by
aligning it with the two
antenna supporting pins.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 Align the Bluetooth support with the positioning groove
on the main board, and install it to the correct position.
Step 5 Check whether the two supports
are installed correctly.
Step 3 Paste a piece of
adhesive to the front camera,
and tear off the liner.
Step 6 Install an
REC FPC seal ring.
Step 7 Paste a
waterproof strip.
INTERNAL
Page 34 of 80