Table of Contents
Advertisement
DeLorme Topo North America 9.0 User Guide
2. Click an option to add it.
3. Repeat steps 1-2 to add more options.
This table describes the statistic options available in the statistic list and/or the profile info
box. List options are bold.
Statistical Data
Option
Linear
Distance*
Terrain
Distance*
Climbing
Distance*
Descending
Distance*
Current Elevation
Elevation Gain*
Climbing
Elevation
Descending
Elevation*
Grade
Average Grade*
Minimum
218
Description
The flat distance of the profile. Does not take elevation into
account.
The 3-D distance of the profile accounting for elevation rise and
descent.
The total distance where the terrain is uphill.
The total distance where the terrain is downhill.
The elevation above sea level at a specific point.
The difference in elevation from the start of the profile to the end of
the profile.
The amount of ascending vertical distance.
The amount of descending vertical distance.
Actually percent grade, rise over run (100 x (rise/run)). For
example, 6 means that for every 100 ft, you gain 6 ft in elevation.
Average of the grade from the start to the current cursor position
(or finish).
The elevation of the lowest point on a profile.
Advertisement
Table of Contents
