Advertisement
Power Lift Chair Operation All Models
1. To recline your chair, press the down button (S2) and hold until you reach
your desired position. Then release the button.
2. To return to a seated position from recline, press
the up button (S1) and hold until the chair returns to a
closed seated position. Then release the button.
3. To lift your chair, press the up button (S1) and hold until
you reach your desired height. Then release the button.
4. To return to a seated position from lift, press the
down button (S2) and hold until the chair returns to the
floor seated position. Then release the button.
5. To lift your chair from a reclined position, press the
up button (S1) and hold. The chair will keep going past
the seated position and start to lift. Release the button
when the chair reaches the desired height.
6. To recline your chair from the lift position, press the
down button (S2) and hold. The chair will keep going past
the seated position and start to recline. Release the button
when the chair reaches the desired reclined position.
7. Getting into your lift chair. While standing next to your chair, press the
chair up button (S1) and raise the chair to a height you can sit against. This
height will vary from person to person depending on the individual's needs.
Raise the chair high enough so you do not have to flop down into the chair.
Flopping down into the chair will damage it and could cause personal
injury. Press the chair down button (S2). As the chair continues downward,
adjust yourself into a position that is comfortable to you. Continue pressing
the button until chair is in the seated position (chair firmly on the floor), then
release the button.
8. Getting out of your chair, press the chair up button (S1) and raise the chair
to a height that enables you to easily stand. Release the button. Return the
chair to the seated position (chair firmly on the floor) after getting out of the
chair so children, pets or obstructions do not get under the chair.
Note: Your Golden power lift chair can be stopped at any time during lift
or recline by releasing the selected button, offering you a wide range
of comfortable positions. Select the position that best suits your needs.
The motor is set to shut off when it reaches its fully extended or fully
retracted position if the selected button is not released. If you should
go past your desired position, select the button to bring you back to
your desired position. You can repeat the process as often as you like.
USB Disclaimer: The supplied USB charging port is only intended to be used with
appropriate smart devices such as phones or tablets. Please refer to device
manufacturer's charging requirements before using. Golden Technologies
excludes liability for any damages or data loss regarding the charging device
on a computer or other electronic device connected to the USB port.
9
1AMP USB
Charging Port
L.E.D.
light
S1
S2
Advertisement
