Attaching The Stand To The Mounting Plate - Dell OptiPlex 3U083 Setup And Quick Reference Manual

18
Setup and Quick Re ference Guide
Insert the tabs into the slots and slide the piece toward the diagnostic
5
lights (see the illustration).
Install a security device in the security cable slot (optional).
6
To remove the cable cover, remove the device installed in the security cable
slot (optional).
Grasp the top piece of the cable cover and slide it to the left until it
1
stops, and then lift it up and away.
To remove the bottom piece of the cable cover, while pressing the
2
lever, slide the piece to the left until it stops, and then lift it up and
away.

Attaching the Stand to the Mounting Plate

7
NOTICE: When installing the computer in the hanging orientation, avoid
locations where it will be bumped by a user's legs or chair.
CAUTION: Attach the mounting plate to a solid surface capable of
supporting 40 lbs (18.1 kg) hanging weight.