Huawei WS7001 Quick Start Manual page 4

Step 1: Connecting the cables
•
Erect the all antennas upright to ensure optimized Wi-Fi
•
If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Configuring the network settings".
•
For routers that support WAN/LAN auto-adaptation, the network ports are WAN/LAN
combo ports. You can also specify a fixed WAN port on the router's web-based management
page.
1 2 3
POWER WPS/RESET
1000M WAN/LAN
WAN
Optical/Broadband/cable modem
(from your broadband provider)
LAN
®
signal.
2
POWER
RESET
LAN
Internet
PON