HoMedics BPA-960BT Manual page 26

Using Triple-Check Measurement:
1. Please make sure the Triple-Check switch, located on the
back of the unit, is in the ON position.
2. Press the USER-SELECT button. After the user number
is selected, press the START/STOP button to confirm the
chosen user.
3. With the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
Note:
If the Rest Assure feature is ON, the 5 minute countdown will
begin after checking procedure is complete.
4. After all symbols disappear, the display will show "00". The
monitor is "Ready to Measure" and will automatically inflate
the cuff to begin measurement.
ON OFF
Triple Check
Date Link
25
AM/PM ON OFF
Rest Assure