Advertisement
Fastener length
Wear eye protection
Keep hands away
Do not dispose of electric tools together with
household waste material. Electric tools and
electronic equipment that have reached the end of
their life must be collected separately and returned
to an environmentally compatible recycling facility.
TROUBLESHOOTING
PROBLEM
Product does nothing or operates sluggishly
Product jams frequently
LED LIGHT FUNCTIONS
TOOL STATUS
Normal
Solid green light (No flashes)
Low battery
Solid red light (No flashes)
Jam mode
Flashing red light
MAINTENANCE SCHEDULE
FREQUENCY
BOXES OF NAILS NUMBER OF NAILS
Daily
N/A
Monthly
5 - 7
2 - 4 months
10 - 20
6 - 12 months
21 - 26
POSSIBLE CAUSE
Inadequate air pressure supply
Inadequate lubrication
Worn or damaged O-ring seals or bumper
Exposure to low temperatures
Exposure to high temperatures.
Incorrect fasteners
Damaged fasteners
Loose magazine
Dirty magazine
Worn or damaged driver
LED LIGHT SCENARIO
No action needed
Recharge or replace battery. If problem persists, contact an Authorised Service
Centre for repair.
Clear jam – Follow instructions in this operator's manual.
Clean body and blow out tool vents; clean magazine rack; check bolts/screws
N/A
for anything that is loose.
Lubricate nosepiece with air tool oil. (Oil type: Synthetic lightweight oil)
15000 - 21000
WARNING! Do not lubricate other parts of the product. Otherwise the product
may be degraded or damaged.
30000 - 60000
Check pressure of tank and re-pressurise.
65000 - 80000
Return to Authorised Service Centre for Service.
Verify adequate air supply. Add air to the
product through the air fill valve.
Lubricate tool.
Contact Authorised Service Centre for repair.
Allow product to warm to proper operating
temperature.
Allow product to cool to proper operating
temperature.
Verify that fasteners are of the correct size.
Replace fasteners.
Tighten screws.
Clean magazine.
Contact Authorised Service Centre for repair.
ACTION REQUIRED
MAINTENANCE TASKS
21
SOLUTION
21
Advertisement
