Dell S2721H Disassembly Manual page 3

5
DELL S2721H
Unplug the LVDS cable from the connector of the
S13
panel module by pushing the earing-locks.
Take away the bracket chassis module and then put
S14
the bracket chassis module on a protective cushion.
Remove the Mylar from the hooks of the bracket
S15
chassis module.
Use a Philips-head screwdriver to remove six screws
for unlocking the circuit board, release all the cables
S16
from the hooks.
(No.1~5 screw size=M3x7.5, Torque=6±0.5kgfxcm;
No. 6 screw size=M4x8, Torque=6±0.5kgfxcm)
2 5
Remove the interface board and power board from
S17
the bracket chassis module carefully, and disconnect
all the cables.
3
4
1
6