Zerotech Vengeance 1-6X24 Instruction Manual page 10

to ensure the best possible fitting of your scope.
3.
Avoid mounting the scope with the rings contacting the junction of the maintube/
erector housing, magnification ring/ maintube junction or the objective/ maintube
junction.
4. It is essential to confirm that no part of the scope is contacting the barrel or receiver
when the scope is mounted in the rings.
5.
Once you have confirmed the fit of the scope in the ring bases, fit the ring tops and
tighten the ring top bolts to between 22–25 in lbs or 2.5–2.8NM.
6.
ZeroTech highly recommends the use of a scope level (bubble level) fitted to the
rings or the scope maintube to ensure the reticle can consistently be aligned with
the fall of gravity every time a shot is fired. This is particularly important for precision
shooting applications.
*If your level mounts to the maintube of the scope, follow the same guidelines as observed
for scope ring fitting to ensure the level does not damage the maintube of your scope.
10
ZEROTECH - INSTRUCTION MANUAL
VG1624-IR_V1_int. 10/2021